TILO product

TILO

By JPL Innovations Pvt. Ltd.

Flexible • Single Component • Water Resistant • Versatile

TILO is a flexible, single-component product suitable for tile bonding and waterproofing in a range of utility areas. It provides strong adhesion and user-friendly application while being suitable for both interior and exterior use.

Flexible
Accommodates substrate movement and thermal changes.
Water Resistant
Best Suitable for wet areas and water-bearing applications.
Buy Now
Call to place your order

Product Overview

Ideal for Mivan, Pre-cast, Gypsum, RCC, AAC blocks, and drywall surfaces. Terrashield Fine delivers a seamless, hydrophobic surface that performs under harsh conditions while improving the overall finish for subsequent paint systems.

Terrashield Fine application on wall

Technical Advantages

Key performance benefits for tile bonding and waterproofing across varied substrates.

Flexible

Permits movement without losing bond strength—ideal for dynamic substrates.

Minimum Thickness

Effective performance at low applied thicknesses—economical and material-efficient.

Strong Adhesion

Excellent bond to tiles and varied substrates for long-lasting installations.

User Friendly

Single component, ready to use—reduces onsite mixing errors and labour time.

Exterior Grade

Suitable for exposed and outdoor applications—weather-resistant performance.

Eco Friendly

Formulation considerate of environmental impact during production and use.

Single Component

No on-site mixing required; ready to use for consistent results.

Water Resistant

Designed for wet areas and waterproofing applications in contact with water.

Application Procedure

Download Tilo TDS

Prior Check

  • Ensure substrate is dry, clean and stable.
  • Ensure surface is levelled and proper slope is provided where necessary.

Procedure

  1. Apply TILO on the back side of the tile to a thickness of 1 to 2 mm and press it from all sides and the centre.
  2. The oozed-out material can be used in the next tile.
  3. Ensure that the corners are filled.
  4. Allow it to dry for 24 hours.

Physically ready for the moment after 96 hours.

Notes

Use Terrashield Fine for levelling where required. Follow substrate-specific recommendations for best results.

Tip: For joint details and finishing recommendations refer to product guidelines or contact our technical team.

←